CorelixRF · RF Hardware Manufacturer
Omnidirectional & Directional · 30 MHz – 6 GHz
CorelixRF provides RF antenna solutions for wideband communication, counter-UAS systems, SDR-driven platforms, RF transmission, and project-based integration.
This page serves as the overview entry for CorelixRF antenna products. Quickly understand our antenna categories by pattern type, frequency range, and application direction, then continue to the corresponding detailed page for complete technical specifications.
Select from omnidirectional, directional, wideband, and custom antenna families organized by pattern type and deployment application.
Use the selection guide to narrow down the right product direction by antenna type, frequency range, and application scenario.
Full specifications, gain curves, pattern details, mounting information, and environmental data are available in each category's dedicated page.
Our antenna products are organized by major product direction so you can quickly identify the category that best fits your project requirements.
Designed for 360° signal coverage. Suitable for wide-area deployment, broad RF coverage, and applications where full-direction operation is required. Often preferred for fixed-site installations, vehicle-mounted systems, and projects that need continuous multi-directional coverage.
Designed for focused energy delivery, higher gain, and more precise target coverage. Suitable for long-range RF transmission, directional deployment, and projects that require stronger signal concentration in a defined direction.
Designed for projects that require broader frequency coverage and reduced system complexity across multiple operating bands. Suitable for multi-band RF systems, broadband integration projects, and applications requiring flexible coverage from low to high frequency ranges.
Available for projects with specific requirements in frequency range, gain target, connector type, radome structure, mounting method, and mechanical integration. If your project cannot be fully matched by a standard product, this is the right starting point for technical discussion.
Choose by antenna type, frequency range, and application direction. These three factors are usually enough to identify the most relevant category before moving to the detailed page.
If you need broad and continuous coverage, omnidirectional is usually the right starting point. If your project requires focused energy or higher gain, directional antennas are typically the better option. For unusual frequency or structural requirements, custom solutions may be more suitable.
If your operating band is already defined, start with the antenna category whose coverage is closest to your target range. For wider-band projects, begin with the product family designed for broader frequency coverage, then confirm gain and pattern requirements in the detailed page.
Different scenarios require different antenna priorities. Wide-area RF coverage often prioritizes omnidirectional coverage, while long-range or targeted systems prioritize directional gain. The most suitable direction may depend on both frequency range and installation method.
Send us your target frequency range, deployment method, gain preference, and application scenario. We will recommend the closest standard product or suggest a suitable custom direction.
Quickly review the main antenna directions before moving to the detailed pages. Complete specifications, gain curves, and pattern data are available in each category's dedicated page.
| Category | Frequency Range | Typical Gain | Pattern | Typical Use | Details |
|---|---|---|---|---|---|
| Omnidirectional | 30 MHz – 6 GHz | 3 – 12 dBi | 360° Omni | Wide-area coverage, vehicle mount, fixed site | View |
| Directional | 430 MHz – 6 GHz | 12 – 20 dBi | Directional | Long-range transmission, focused coverage | View |
| Wideband | 30 MHz – 6 GHz | 3 – 15 dBi | Multi-Band | Multi-band systems, broadband integration | View |
| Custom | Project-Defined | Per Target | Custom | Project-specific frequency, structure, integration | Discuss |
For complete technical specifications, gain curves, pattern details, or environmental data, continue to the corresponding detailed page or contact us directly for documentation.
Standard products for fast selection · Custom support for project-specific requirements
In addition to standard antenna products, CorelixRF supports custom antenna development based on project requirements. If your project has specific needs in frequency range, gain target, connector type, radome design, mounting method, structure, or integration conditions, we can review those requirements and recommend a suitable development direction.
Send us your specs for a faster recommendation
If you already know your target frequency range, gain preference, mounting method, or application scenario, send the details directly to us. We will recommend the closest standard antenna category or suggest a more suitable custom direction based on your project requirements.
All inquiries are treated as confidential. We do not share your information with third parties.
Engineering response within 24 hours · Technical proposal within 3 business days
sales@corelixrf.com · WhatsApp: +86 150 5974 7408
