What if my required frequency band is not listed?

The listed datasheets are representative platforms only. CorelixRF can review custom narrowband amplifier requirements based on target frequency range, output power, operating mode, source type, control interface, connector, cooling and mechanical requirements.

Narrowband RF Power Amplifiers | Custom Fixed-Band RF Amplifier Manufacturer | CorelixRF

Fixed-Band RF Amplifier Platforms

Narrowband RF Power Amplifiers for Dedicated Frequency Bands

Factory-direct narrowband RF amplifier platforms for fixed-frequency RF systems, selected datasheet review, custom frequency bands, VCO source, passive input, RS485 control, 5-pin functional control, DDS source 7W2 control and factory RF test data upon request.

This page lists representative CorelixRF narrowband amplifier platforms for preliminary engineering review. If your required frequency band is not shown, our engineering team can review a custom band, power level, source type, control interface, connector, cooling and mechanical configuration.

View Datasheet Request Test Data Custom Band Support VCO / Passive Input RS485 / 5-Pin / 7W2 Control

View Datasheet Models

Datasheet Review Console

Engineering Review

Narrowband RF power amplifier on RF engineering test bench

400–5900 MHz Representative Bands

30W–200W Shown Platforms

Custom Band / Source / Control

PDF Datasheet Preview

RF Factory Test Data

OEM Integration Review

30W–200W Representative narrowband output power platforms

400MHz–5.9GHz Selected fixed-band datasheet examples

28V DC Common nominal supply platform reference

M / V Passive input and source configuration options

Test Data Measured RF data available upon request

Selection Logic

When to Choose a Narrowband RF Amplifier

Narrowband RF power amplifiers are suitable when your system works within a defined frequency band and requires stable output power, gain response, thermal performance and integration reliability across that specific band.

01 / Fixed Band

Dedicated Frequency Band

For fixed-band RF systems where the target frequency range is already defined by the project.

02 / Stable Output

Stable Output in a Defined Band

Designed for projects that need consistent output power and gain performance within a selected operating band.

03 / Control

Source and Control Flexibility

Supports passive input, VCO source, no-control versions, RS485 control, 5-pin functional control and DDS source 7W2 control options.

04 / OEM

OEM System Integration

Suitable for RF test platforms, communication systems, telemetry links, front-end modules and project-based RF subsystems.

Selected Datasheets

Representative Narrowband RF Amplifier Datasheet Previews

The following models are selected narrowband RF amplifier platforms for preliminary engineering review. They do not represent the full customization range. If your required band is not shown, CorelixRF can review a custom narrowband amplifier configuration based on your frequency range, output power, source type, control interface, connector, cooling and mechanical requirements.

Model	Frequency	Power	Gain Typ.	Size	Source / Control	Action
CRF-PA-400M440M-30W	400–440 MHz	30W	43 dB	125 × 59 × 21.5 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-400M440M-50W	400–440 MHz	50W	45 dB	125 × 59 × 21.5 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-400M440M-100W	400–440 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-400M440M-150W	400–440 MHz	150W	50 dB	200 × 158 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-400M440M-200W	400–440 MHz	200W	51 dB	200 × 158 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-860M930M-100W	860–930 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-1170M1280M-100W	1170–1280 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-1560M1620M-100W	1560–1620 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-2350M2550M-100W	2350–2550 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-2500M2700M-100W	2500–2700 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-5150M5350M-100W	5150–5350 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-5700M5900M-100W	5700–5900 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data
CRF-PA-5725M5850M-100W	5725–5850 MHz	100W	48 dB	160 × 120 × 25 mm	M / V versions	View Datasheet Request Test Data

CRF-PA-400M440M-100W

100W

Frequency 400–440 MHz Gain Typ. 48 dB Size 160 × 120 × 25 mm Source / Control M / V versions

View Datasheet

CRF-PA-860M930M-100W

100W

Frequency 860–930 MHz Gain Typ. 48 dB Size 160 × 120 × 25 mm Source / Control M / V versions

View Datasheet

CRF-PA-5150M5350M-100W

100W

Frequency 5150–5350 MHz Gain Typ. 48 dB Size 160 × 120 × 25 mm Source / Control M / V versions

View Datasheet

Need a Different Narrowband Frequency?

The listed datasheets are representative platforms only. Custom frequency bands, output power levels, source types, control interfaces, connectors, cooling methods and mechanical formats can be reviewed after receiving your project requirement.

Configuration Support

Custom Band, Source and Control Options

CorelixRF can review narrowband amplifier requirements beyond the listed datasheets. Configuration can be adjusted according to your RF source, control logic, interface, mechanical layout and system integration needs.

Passive Input VCO Source No-Control Version RS485 Control 5-Pin Functional Control DDS Source 7W2 Control

Band / Power

Custom Frequency and Power

Selected datasheets show representative frequency bands. Other fixed bands and output power levels can be reviewed according to project requirements.

RF Source

Passive Input / VCO Source

Configurations can support passive RF input or internal VCO source depending on system architecture and signal chain requirements.

Control

No-Control / RS485 / 5-Pin Control

Control interfaces can be reviewed for no-control versions, RS485 control and 5-pin functional control options.

DDS / 7W2

DDS Source 7W2 Control

DDS source and 7W2 control configurations can be discussed for project-specific amplifier control and signal source integration.

Mechanical

Connector, Cooling and Mechanical Format

RF connectors, cooling method, package size, mounting interface and mechanical outline can be reviewed for OEM integration.

Engineering

More Details Upon Inquiry

For configurations not shown in the listed datasheets, CorelixRF can provide engineering review based on your frequency, power, source and control requirements.

Factory RF testing setup for narrowband RF power amplifier

Factory RF Testing Before Shipment Power / Gain / Spectrum / VSWR / Thermal Review

Measured Data Support

Factory RF Testing Before Shipment

For narrowband amplifier projects, CorelixRF can perform factory RF validation according to the selected configuration and customer requirement. Test data can be provided upon request to support engineering review and purchasing decisions.

Output power check

Gain response check

Spectrum condition review

Harmonics and spurious review

Input VSWR or load review

PA enable / disable response

Thermal stability review

Final inspection before shipment

Engineering Intake

Send Your Narrowband Amplifier Requirement

To help our engineering team review a suitable narrowband amplifier platform or custom configuration path, please share the key RF, electrical, mechanical and control requirements when contacting CorelixRF.

Target frequency range

Required output power

CW or pulse operation

Duty cycle, if pulse

Input signal level

Passive input, VCO or DDS source

No-control, RS485, 5-pin or 7W2 control

Supply voltage

RF connector preference

Cooling method

Maximum size or mounting limit

Required test data

More configuration details can be reviewed upon inquiry. The datasheet list is intended for quick preliminary review, while custom frequency and control requirements should be confirmed by engineering evaluation.

FAQ

Narrowband Amplifier Questions

These questions help engineering buyers quickly understand whether the listed datasheets or a custom narrowband configuration path is more suitable.

A narrowband RF power amplifier is designed to operate within a defined frequency range and provide stable output power and gain performance for fixed-band RF systems, testing platforms or OEM RF subsystems.

The listed datasheets are representative platforms only. CorelixRF can review custom narrowband amplifier requirements based on your target frequency range, output power, operating mode, source type, control interface, connector, cooling and mechanical requirements.

Yes. Depending on the project, configurations can support passive input, VCO source and DDS source options. More source and control details can be reviewed upon inquiry.

Control options can include no-control versions, RS485 control, 5-pin functional control and DDS source 7W2 control configurations, depending on the selected amplifier platform and project requirements.

Yes. The page provides selected datasheet previews for representative narrowband amplifier platforms. For measured test data, custom band review or integration details, you can submit a request for engineering review.

Yes. CorelixRF can provide factory RF test data upon request, including output power, gain response, spectrum condition, VSWR or load review, thermal stability and final inspection information depending on project requirements.

Next Step

Need a Narrowband RF Amplifier for a Specific Band?

Share your frequency range, output power, source type, control method, cooling requirement, connector preference and integration limits. CorelixRF will help review whether an existing datasheet platform or a custom narrowband amplifier configuration is more suitable for your project.